www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 12 dimensions in inches (millimeters) are subject to change without notice. ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. piggyback shrink boot connector adapters 635-005 environmental piggyback boot cable feed-through composite how to order product series basic no. finish sym (table ii) 635 - 005 xb 01 - 2 - 5 material and finish feed-thru body, washer, jam nut: high temperature engineering thermoplastic (black)/ see table ii o-ring: silicone/n.a. shrink boot: elastomeric/n.a. notes assembly identifed with glenair's name and part number, space permitting. glenair 600 series backshell assembly tools are recommended for assembly and installation. dash number (table iii) length in 1/8 inch increments, 5/8 inch minimum, eg. 5 = .625 inches boot material type (table iv) for easy and reliable environmental sealing of feed-through fittings k thread (2 pls) feed-thru body c flats (2 pls) n after unrestricted shrinkage ? e ref. (2 pls)
www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 13 dimensions in inches (millimeters) are subject to change without notice. ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. piggyback shrink boot connector adapters table ii: finish sym finish description xb no plating, color black 635-005 environmental piggyback boot cable feed-through composite table iv: boot material selection guide attribute type 1 high-performance semi-rigid elastomer type 2 zero-halogen semi-rigid polyolefn type 3 general purpose flexible polyolefn continuous operating temp. -75 to +150 c -30 to +135 c -55 to +135 c resistence to fuels, oils excellent very good good low toxicity, zero halogen no yes no table iii: key dimensions dash no. ? a b c d ? e f k thread m min n max 01 .300 (7.62) .670 (17.0) .950 (24.1) 1.50 (38.1) 1.05 (26.7) 1.18 (30.0) m12 x 1.5 .300 (7.62) .138 (3.51) 02 .400 (10.2) .870 (22.1) 1.14 (29.0) 2.16 (54.9) 1.33 (33.8) 1.18 (30.0) m16 x 1.5 .400 (10.2) .138 (3.51) 03 .550 (14.0) 1.06 (26.9) 1.34 (34.0) 2.64 (67.1) 1.54 (39.1) 1.50 (38.1) m20 x 1.5 .550 (14.0) .197 (5.00) 04 .760 (19.3) 1.18 (30.0) 1.50 (38.1) 3.15 (80.0) 1.68 (42.7) 2.17 (55.1) m24 x 1.5 .760 (19.3) .236 (6.00) 05 .950 (24.1) 1.48 (37.6) 1.89 (48.0) 3.90 (99.1) 2.15 (54.6) 3.15 (80.0) m30 x 1.5 .950 (24.1) .335 (8.51) 06 1.49 (37.8) 1.61 (40.9) 2.05 (52.1) 5.12 (130) 2.33 (59.2) 3.90 (99.1) m36 x 1.5 1.49 (37.8) .394 (10.0) 07 1.58 (40.1) 2.17 (55.1) 2.64 (67.1) 5.12 (130) 2.68 (68.1) 3.90 (99.1) m48 x 1.5 1.58 (40.1) .394 (10.0) jam nut feed-thru body .200 (5.10) f b flats hot melt adhesive o-ring ? a max m as supplied washer length .125 (3.20)
|